Descripción
DM4370
Product Overview
The DM4370 Ethernet Switch is a compact, high performance access switch ready for the growing migration of access services towards 10 Gbps. The switch is based on Datacom’s modular network operating system DmOS, with support for a complete L2/L3 feature set including MPLS support, turning it into the perfect fit for high bandwidth and high value enterprise or mobile backhaul access applications. The switch contains 4 optical SFP+ based 10GE interfaces, 4 optical SFP-based 1GE interfaces and 4 additional 1GE electrical interfaces.
The DM4370 switch is 1U height and it can be installed both on desktops or standard 19″ rack, with a mechanical adapter holding up to two switches side by side. The product has an integrated full-range AC/DC power supply module and an additional 12V DC input for optional power redundancy for high availability services and operation.
Wire Speed with full hardware-based L2, L3 and MPLS forwarding, filtering and QoS
IEEE802.1Q VLAN with Q-in-Q and VLAN Translate capabilities
Link Aggregation and LACP
Support for Ring applications through EAPS or ERPS protocols
STP/RSTP for loop protection
L2 Slow Protocol Tunneling (L2CP)
Up to 8 QoS queues per port
Static Routing and Dynamic Routing through OSPF and BGP protocols
Virtual IP redundancy through VRRP protocol
Operation as Label Edge Router or Label Switch Router through MPLS encapsulation
LDP for label distribution on MPLS network infrastructure
Ingress and Egress Rate Limit
Packet classification by IEEE802.1p, DSCP, Source/Destination Port
Packet Scheduling through SP and WFQ modes
ACL Matches by port, MAC address, IP, DSCP, TCP/UDP
CLI Management interface with Telnet/SSH
TACACS and RADIUS support for access and management policies administration
Valoraciones
No hay valoraciones aún.